Automatic Insulating Glass Machine Double Glass Machine

Product Description

This Vertical Insulating glass machine is composed of 1) loading section, 2) washing and drying section, 3) transmission and storage section, 4) light inspection and spacer bar attaching section, 5) transmission  section, 6) inside assembly and inert gas filling section, 7)storage and unloading section. With special design, it can wash Low-E glass effectively with high speed.
This line is controlled by PLC and realizes the automatic control and frequency control of the motor speed of the whole line. It adopts advanced assembly technique and solves the problems of uneven press and misplacement of the glass. The assembly section adopts limit switch and cylinder tank whose travel distance can be adjusted, making the operation easy and the location precise and the movement reliable.
Low-E glass automatic diagnosis system. The back board is high quality Aosong board through the NC machining and wheel combination, makes it beautiful and durable.
It is the first section of the line and its main function is to transmit the glass to the washing and drying section. The transmission is carried out by chains driven by the motor and the transmission speed is stable. It runs at the same speed of the washing and drying section and the speed can be changed by the inverter. It can avoid the back board bending and deformation, waterproof and anti-acid.

Strong points
a. The water in the washing tank, you'd better use the purified water.
b. Mechanical adjustment wind of knife, without any manual operation. According to the thickness of the glass, mechanical detection and adjustment of the wind knife.
c. 15kw fan, two pairs of wind knife with muffling equipment and enough wind pipes, to lower the noise and realize the wind uniform and rapid drying.
d. All the posts(brush post and wind knife posts and others) are installed onto the upper bracket. The bottom board is a complete piece of stainless steel board. without any joint point and drilling hole. So the washing section have no chance to leak.
e. The screw holes of the fixed brush are all strip shaped. The positions of the brushes can be adjusted according to needs. After the brushes have been shortened for a long time using, the distance between two pieces of brushes in each pair of brush can be adjusted. So that the bushes can be used for a longer time. Otherwise, you have to change the brushes.(The life of each brush is different. If you polish the edge after cutting, the brushes using life can be longer, if not polish, the brushes are easy to be cut)
f. The brush wiper is more convenient to use and not need to soak in advance. The effect of water scraping is better.
Water tank is fixed at the bottom of the washing body. There are two 1.8KW heater in the water tank. If the water in your area is not available, it is better to soften the water with our Water Purifier. In order to ensure the cleanliness of the glass, please ensure the cleanliness of the water in the tank. If there is oil on the surface of the glass, you'd better use treated water.
The front cabinet and back plate of the washing and drying section are made of high quality stainless steel. The front cabinet is bending from a whole piece of stainless steel plate (with powder spraying), No Welding, so that it is durable and not deform-able. Stainless steel and other corrosion resistant materials are used in the contact parts with waterproof. The high pressure fan and the sealed sound absorbing material and the circulation air device not only reduce two times of pollution, but also reduce energy consumption and noise, and ensure the best cleaning effect and service life for a long time.
1) Washing part: This part has three pairs of soft brushes (the material is high -temperature nylon wire ) and two pairs of sponge roller. The brushes are driven by three synchronous motors separately and the movement is stable. Three pairs of tubular rollers type of hair brushes, use High Temperature Resistant and soft nature hair brush, effective protection of the coating glass especially the LOW-E glass layer stratification. There are five pairs of rollers in washing box, it can make the glass move smoothly.
2) Drying part: this part is also made of stainless steel. The air enters into the air knife from the top. The distance between the air knife and the glass should be adjusted according to the thickness of the glass in order to guarantee the drying effect. Air passage adopts the most advanced design and increase the drying speed and productivity. There are two pairs of wind knife. The angle of the wind knife changed automatically when the thickness of glass changed. This make sure the glass is dry. The bearing take famous brand SKF, which smooth with oil-less powder. In this case it will keep water free from oil and keep water clean.
About Us (Professional Manufacturer of Insulating Glass Prodcution Machine)
SHANDONG BOKE CNC EQUIPMENT CO.,LTD was built at the outset in July 2000. It is a new high-tech private enterprise integrated production, scientific research, development the insulating equipment of middle and high-grade.
Since set up, we had 21 years experience in the field of insulating glass production together with intensive research and development, as well as a global consulting and service network stand for High Tech. Through ISO9001, High tech and quality through the most up-to-date fabrication methods distinguish ZHTD as global market leader. Our machines have attained CE Certificate.

FAQ

1.Q: Are you a manufacturer?
 

A: Yes, we are a professional manufacturer of insulating glass production line for more than 21 years.
 

2.Q: What does your company produce?
 

A: Insulating Glass Production Line (with and without gas filling on line), Automatic Sealing
Robot, Butyl Coating Machine, Automatic Aluminum Spacer Bending Machine, Automatic Desiccant Filling Machine, Aluminum Frame Conveyor, Two-component Sealant Extruder, Glass Washing Machinery, Rotating Sealing Table, and so on.
 

3.Q: How about your delivery time?
 

A: Normally the delivery time is about 30 days. For some special case, we can make it within 2 weeks, it depends on different products.

4.Q: What methods of payment do you accept?
 

A: We accept T/T, L/C.
 

5.Q: What is the Loading Port?
 

A: Qingdao Port